ZVRE and ZVCE : the economy models

The test set of these models comprises two SWR bridges (ZVRE) or directional couplers (ZVCE), an RF switch, two measurement channels and one reference channel. They measure the magnitude and phase of all four S-parameters of a DUT, allow a full two-port calibration (TOSM) and have an exceptionally high accuracy and wide dynamic range.

ZVRE, ZVCE (bidirectional, 3 channels)

ZVR and ZVC : the universal models

ZVR and ZVC comprise a test set with two SWR bridges (ZVR) or directional couplers (ZVC), an RF switch, two measurement channels and - unlike ZVRE and ZVCE - two reference channels. With this configuration a variety of novel calibration procedures, eg TNA, can be performed, which considerably improve the accuracy particularly in non-coaxial applications. ZVR and ZVC are the allrounders of the family and suitable for applications in R&D and production no matter how sophisticated.

ZVR, ZVC (bidirectional, 4 channels)

Test sets

The network analyzers can be provided with different test set options so that an optimally configured test setup is available to suit the applications.

For the 4 GHz analyzers "active" or "passive" test sets with a characteristic impedance of 50 W or 75 W are available. A 50 W passive test set is standard equipment. With active test sets, the DUT can be biased directly via the inner conductor of the test port. The 8 GHz models ZVCE and ZVC are always equipped with 50 W active test sets. Depending on the model, the test sets comprise one or two power splitters, an electronic switch and one or two SWR bridges or directional couplers. Additional step attenuators (0 dB to 70 dB, components marked red in the drawings below) can be inserted into the generator paths and the two measurement channels to extend the power range of the receivers to +27 dBm and to lower minimum output power to -95 dBm. When the test sets are fitted with attenuators and the External Measurements option (components marked green in the drawings below), generator and receiver can be alternatively switched to three ports on the front panel (OUTPUT a1, INPUT b1, INPUT b2). This increases output power, sensitivity and dynamic range, and measurements down to 10 Hz can be performed with the 4 GHz models. In addition, the flexibility on external test sets, e.g. using an external pre-amplifier, is enhanced. The Reference Channel Ports (components marked blue in the drawings below) allow to feed the signal for the reference channel a1 from outside. This feature facilitates e.g. phase measurements on frequency converting devices. The test ports are fitted with female N connectors.

Test Set ZVRE and ZVCE

本公司專業經營各類二手進口儀器（銷售、租賃業務），成色新，價格低，技術先進、質量可靠、性能穩定的優良產品。長期承接銷售、租賃、維修、出售二手**儀器,包括Agilent、HP、Anritsu、Advantest、R/S、/MARCONI等世界知名品牌的網絡分析儀、頻譜分析儀、綜合測試儀、數字通訊測試儀、高頻信號源、數字示波器、天饋線測試儀、電聲測試儀，音頻分析儀、等二手高頻通訊測試儀器儀表的銷售及租賃業務。

 

國儀電

本公司長期現金銷售/收購/出售：網絡分析儀、無線綜合測試儀、頻譜分析儀、視頻音頻分析儀、藍牙測試儀、視頻圖象信號源、LCR測試儀、高低頻信號源、示波器、萬用表、手機程控電源、直流電源、電子負載、頻率計、GPIB卡,PCI-GPIB卡、GPIB-USB-B等二手儀器出售/維修/收購。歡迎來電咨詢!!。